Halogen Rapid Moisture AnalyzerIis mainly used to measure the water content of tea and other foods, with an accuracy of 0.01%. The moisture meter is small in size and fast in measurement, which is suitable for various tea plants
Flat type tea press shaping machine mainly for LongJing Tea, through the computer control program, the manual operation processes such as tea feeding, fixation, flat shaping, polishing are changed into computer control, so that the evenness of each batch of tea can be adjusted and controlled
DL-6CRT-75 tea rolling machine has double action, mainly for tea twisting, drum diameter 75cm, capacity about 120 kg per batch.
DL-6CQFJ-70 used for sorting fresh leaf which picked by tea harvester, can separate different sizes of tea for producing different grades of finished tea.
DL-CRQ-20Z CTC black tea HRS Gyrovane rotorvane machine mainly used for processing CTC black tea.
DL-6CYQT-90250 mainly used for Oolong tea processing, drum made of bamboo, the activity of withered tea was increased by shaking, It can make tea taste more fragrant, Capacity about 120 kg per batch.
DL-6CHL-RQ10 is small type tea drying machine, can drying for all kind tea, use gas heating, capacity from 40kg to 600kg per hour, temperature and speed adjustable, safety, energy saving and environmental protection
DL-6CHZ-9QB is full stainless steel tea dehydrator, electric heating, drying area about 10sqm, capacity 27-45 kg per batch.
The first monograph on tea science in China and the first monograph on tea in the history of the world is "The Classic of Tea" written by Lu Yu. Explain the tea in detail
One of important process for the black tea is fermentation, use the suitable fermentation machine could control good quality of black tea.
Different green tea drying methods, different machines, green tea strands, and green tea aroma are all different, welcome your contact for more details.
Because the freshly picked tea leaves have more moisture and the grass smell is heavier, they need to be placed in a cool and ventilated room for withering. After withering, the water content of the tea leaves is reduced, the leaves become soft, and the grassy smell disappears. and the aroma of the tea leaves is revealed, which is conducive to subsequent processing, such as fixation, twisting, fermentation, etc. The color, taste, and quality of the green tea are made are better than tea without withering.
Spread out the tea leaves on the ground (need to lay a layer of plastic cloth, etc. to prevent tea leaves from directly contacting the ground). This method is the most primitive and the simplest method. Advantages: save money, less trouble, hardly need any input, about 2.5 kg/㎡ of tea leaves can be placed Disadvantage: It is only suitable for the production of small batches of tea. If large quantities of tea leaves are produced, the required space is very large; if it encounters rainy weather, it can only be placed in the room to wither.
Place the fresh leaves on the withering racks, each withering rack has 20 layers, and each layer has a whole bamboo sieve tray. There are mesh holes on the sieve tray to facilitate air flow. At the same time, bamboo strips can absorb water, increase the rate of water evaporation, and accelerate the speed of tea leaves withering. Advantage: Small footprint; each withering tray can hold 2.5 kg of fresh leaves, and each shelf (about 1.2 square meters) can hold 50 kg of fresh leaves, which greatly saves space; at the same time, the withering tray is made of bamboo, which is clean, hygienic and environmentally friendly . There is a pulley at the bottom of the machine, which makes it easier to move.
Put the fresh leaves on the withering machine. The withering machine can place 40 kg of tea leaves per square meter. The machine can blow air from the bottom of the tea leaves, which can adjust the temperature of the wind, greatly increasing the withering speed of the tea leaves. Advantages: Small area, hot air can be blown in, greatly improved the withering speed (efficiency increased by about 70%) Disadvantages: The machine needs to be heated, the power is about 15kw, and it needs to be connected to a 380V power supply.